SIEMPRE SEGUROS
RIESGOS Y PREVENCION
TRABAJOS DE SOLDADURA Y CORTE
Los trabajos de soldadura, corte y los procesos anexos son actividades potencialmente peligrosas que pueden afectar tu integridad personal. Es importante que conozcas los riesgos, los tengas muy en cuenta cada vez que realices un trabajo y tomes las medidas preventivas necesarias para minimizar o anular la ocurrencia de un accidente.
A continuación, identificamos los principales riesgos en este tipo de trabajo y las precauciones que debes tomar.
RIESGOS
Daño ocular.
Quemaduras.
Problemas respiratorios.
Explosión.
Incendio.
Shock eléctrico.
Daños en el oído por el ruido
Cortes.
Golpes.
PREVENCIÓN
Antes de empezar tu trabajo:
- Revisa que tus herramientas, equipos y cables estén todos en buenas condiciones.
- Es obligatorio que uses tus Equipos de Protección Personal-EPP (Figura 1) como:
Gafas de protección.
Calzado de seguridad.
Guantes de cuero.
Mandil de cuero.
Polainas.
Careta para soldar.
- Para evitar un incendio ocasionado por las chispas de la soldadura o proyecciones, inspecciona constantemente el lugar donde trabajas y asegúrate de tener un extintor a la mano y no tener materiales inflamables cerca (Figura 2).
- Tu puesto de trabajo debe estar bien ventilado, para evitar la acumulación de gases tóxicos.
- Mantén a los niños lejos de todos los equipos cuando realices tus actividades (Figura 3).
- Verifica que solamente personas capacitadas instalen, usen o den mantenimiento a los equipos.
Durante tu trabajo:
- Las piezas que vas a soldar y los equipos que usarás deben estar instalados con la puesta a tierra adecuada (Figura 4). Verifica los contactos eléctricos.
- No realices trabajos de soldadura o corte en locales donde haya combustible, materiales inflamables o exista riesgo de explosión.
- No sueldes ni cortes tanques, u otros recipientes cerrados que no hayan sido examinados previamente y declarados seguros por una persona capacitada.
- Mantén tu cabeza fuera del humo y por ninguna razón lo respires (Figura 5).
- No utilices lentes de contacto.
- Al trabajar en espacios cerrados tienes que controlar los niveles de oxígeno.
Es posible que necesites respiradores con inyección de aire fresco.
- Al realizar trabajos encima o cerca de techos, muros o tabiques de material inflamable, tienes que cubrir las superficies con elementos protectores o planchas de material resistente al fuego.
- Para la manipulación, transporte y ubicación de los cilindros de gas comprimido, tener en cuenta lo siguiente (Figura 6):
- Para moverlos, primero se deben inclinar a un lado y luego hacerlos rodar sobre los filos de su base. No dejarlos caer ni golpearlos intencionalmente.
- Cuando se transporten en vehículos motorizados deben ser asegurados y puestos en posición vertical.
- Las tapas de protección de las válvulas deben estar siempre aseguradas. Nunca se deben levantar los cilindros por su tapa de protección.
- Los cilindros deben estar lejos de donde realices los trabajos de corte y soldadura. De no ser posible, se aislarán con una barrera resistente al fuego.
- Usa portaelectrodos con aislante (Figura 7).
- No enrolles los cables de los equipos de soldar alrededor de tu cuerpo.
- Verifica que los cables no hagan contacto con las chispas o metal fundido.
- Apaga el equipo cuando no esté en uso.
Obra protegida por la ley de derechos de autor
Aceros Arequipa S.A. Corporation
Av. Antonio Miró Quesada
N.° 425, piso 17, Magdalena del Mar.
517-1800
Carretera Panamericana Sur Km 241. Paracas. Pisco - Ica
Variante de Uchumayo Km 5.5, Cerro Colorado, Arequipa
Av. Tupac Amaru 1620 AA.HH. Alto Mochica II, la Esperanza, Trujillo
Sector Coscobamba, Carretera Piura - Paita S/N Lote 5A Piura - Piura - Veintiséis de Octubre
Aceros del Altiplano S.R.L. Corporation
Urb. Parque Industrial Latinoamericano, Unidad Industrial UI 06,Mz. 1, lote 4 - Warnes.
Calle E - Lote 14 manzano A-08 Urbanización Cervecería Boliviana Nacional - Bellavista Viacha.
Calle Tte. Monasterios S/N Zona La Maica - Cochabamba.
ACEROS AMÉRICA S.A.S.
Cra 25 #13 – 117
Parcelación Industrial la Y. Yumbo
Aceros Arequipa AA S.AS Corporation.
Barrio Ficas Delia Vía Durán Tampo KM. 8.5 Durán - Guayas - Ecuador
ACEROS AMÉRICA SpA
Sucursal: COST ORIENTE RUTA 26, #S/N NUDO URIBE - ANTOFAGASTA
Usa
13838 Harllee Rd., Palmetto, FL 34221
+1 (941) 722-5566
2550 Ave N, St. Petersburg, FL 33713
+1 (727) 321-5878
In Aceros Arequipa S.A. (hereinafter, "Aceros Arequipa") we believe in the importance of communicating our ideas and do it in a transparent manner. so these terms will allow users of our website and / or any of our applications know the terms under which these services are used made available on our digital platform. By using the digital services made available by Aceros Arequipa, you accept the conditions described in this document and in the privacy policies, as well as in the other terms published in order to make you aware of your rights and duties when using any of these elements that we make available to you.
2. Aims and purpose.The purpose of our efforts developed on our digital platforms is to let you know the information to which you have access. This information is published and made available to you for your use under the conditions expressed in this document and the data that you authorize to use are all those that correspond to your personal data.
3. Use of our services.The services we make available to you must be used in good faith and in accordance with the following guidelines:
• They must be used properly and in good faith.
• You must only access our services using the user interfaces provided by our company.
• Any attempt to interfere with such services by any means is prohibited.
• If we detect manually or through the use of our electronic security systems that any user is attempting to use these services inappropriately, our company may block the user and deny access to them without restriction.
• The use of our platform does not make you the owner of any of the elements that make it up.
• All the elements that make up our services, whether they are configuration and/or programming codes, as well as the published content elements, are the property of Aceros Arequipa or of those who are authorized to use them by means of an agreement.
• None of our services should be used in any way that could infringe a current rule, or is contrary to morality or decency.
Some of the services provided on the digital platform may require the entry and therefore the delivery of personal data, before accessing them. In these cases you agree to provide truthful information or simply not use such services. In the event that you are required to create a username and password, you are responsible for your password and the proper care of it. Our company is not responsible for any action that may be taken using your password on our systems if you have failed to comply with this obligation.
We are respectful of the law and, therefore, of the protection of your personal information which is done in accordance with the provisions relating to the law 1581 of 2012, which corresponds to the protection and management of personal data. As well as all those rules that involve the development of the same. For more information related to the way in which Aceros Arequipa protects the information and personal data of users, you can enter the following link and view the privacy policies of the information: View cookie policies
5. Contents used.Our services make available to you a large amount of content in digital format, whether text, images, videos, or other content that we may deem appropriate to use. The ownership of the copyright published in any of these services belongs to Aceros Arequipa, its customers, suppliers or third parties that may have authorized us to use these contents.
Under no circumstances may any user appropriate, claim as their own or claim ownership of any of these contents. In case you consider that any of the contents published by us is violating any rule of copyright and / or industrial property you can use the comment system to let us know. The comment must have contact details and identification of the user in order to contact you and make the clarification to the claim filed.
6. Improvements and modifications.Aceros Arequipa constantly modifies and improves the characteristics of the services it provides on its digital platform. For this reason it is possible that some services may be modified over time and others may be restricted or even eliminated.
You may stop using any of our services at any time, just as we may modify or discontinue providing them.
7. Modification of these Terms and Conditions.Any modification, update or extension produced in these Terms and Conditions will be immediately published, being the responsibility of the User to review the Terms and Conditions in force at the time of navigation. The use by users of the site or Aceros Arequipa is considered as irrevocable acceptance of such revisions.
Date of last update: 27/08/2021.